Extractor Fan Installation service

Looking for an electrician near you to install or replace an extractor fan? Our electrical contractors provide professional extractor fan fitting and replacement services for domestic and commercial properties. With expertise in electrical installation, repairs, and certifications, we ensure your extractor fan is installed to the highest safety standards. Contact us for trusted electrician services in your area.

What are the reasons for installing or replacing an extractor fan?

Installing or replacing an extractor fan is important for several reasons. An extractor fan helps to improve the air quality in your home by removing stale, humid, or polluted air from the room, particularly in kitchens and bathrooms. It also helps to reduce the build-up of mold and mildew, which can be harmful to your health. Additionally, installing an extractor fan can help to prevent the formation of condensation, which can lead to dampness and damage to walls and ceilings. Overall, installing or replacing an extractor fan can greatly improve the ventilation in your home and contribute to a healthier living environment.

IMAGE

Do you need help with fitting or repair extractor fan?

Exploring the Various Types of Extractor Fans Available in the UK

There are several different types of extractor fans commonly used in the UK. These include:

Wall-mounted fans: These are mounted on an exterior wall and vent directly to the outside.

Ceiling-mounted fans: These are installed in the ceiling and vent through ductwork to the outside.

Inline fans: These are mounted in the ductwork and can be used with multiple vents in a large space.

Window fans: These are installed in a window and vent directly to the outside.

Heat recovery ventilation (HRV) systems: These are more complex systems that recover heat from the extracted air to warm incoming fresh air.

IMAGE

Do you need extractor fan installation service?

How to Install or Replace an Extractor Fan: Step-by-Step Guide

Extractor fan fitting and replacement process involves several steps that need to be followed to ensure a successful installation. Here are the typical steps involved:

Determine the location: The first step is to determine the location where the extractor fan will be fitted. The location will depend on the room, the size of the room, and the type of extractor fan to be fitted.

Choose the right type of extractor fan: Choose the right type of extractor fan that meets your specific needs. There are several types of extractor fans available, including axial, centrifugal, and mixed flow fans.

Prepare the area: Prepare the area where the extractor fan will be fitted. This may involve removing the old fan, cleaning the area, and ensuring that the area is free from any obstructions.

IMAGE

Install the new fan: Follow the manufacturer’s instructions to install the new extractor fan. This may involve connecting the wiring, fitting the ducting, and securing the fan in place.

Test the fan: Once the fan has been fitted, test it to ensure that it is working properly. This may involve turning it on and off, adjusting the speed, and checking the noise level.

Clean up the area: After the installation is complete, clean up the area and dispose of any waste materials.

Obtain certification: It is important to obtain the relevant certification and documentation to prove that the installation has been completed to the required standard. This may include an Electrical Installation Certificate or a Building Regulations Compliance Certificate.

Do you need help with fitting or repair extractor fan?

Signs That Indicate You Need to Replace an Extractor Fan

There are several signs that indicate you need to replace an extractor fan, such as reduced airflow, excessive noise, and visible damage to the fan or its components. Additionally, if your extractor fan is over 10 years old, it may be time for a replacement. Another indication is a musty or damp smell in the room, as this suggests the fan is not effectively removing moisture and condensation.

Extractor Fan Fitting and Replacement Costs in the UK

Replacing an extractor fan is a unique project and the cost will depend on several factors. To know the exact cost, it is best to request a quote from a certified electrician. However, we can give you a general idea of the cost ranges.

The price of a new extractor fan generally ranges from £20 to £50. However, some high-end fans may cost more. The cost can be influenced by factors such as the type of fan, extraction rate, noise level, energy efficiency, and quality.

Electricians usually charge between £45 and £150 per hour, and the replacement process usually takes between 1 to 3 hours. If you request the service during normal working hours, you can expect to pay less. However, if you require the replacement service during the night or weekend, it will typically cost more.

On average, replacing an extractor fan in the UK costs between £150 to £300, while a new installation may cost between £250 to £400.

At coventry electricians Electricians, we offer high-quality solutions at competitive rates without any hidden charges. Request a free, no-obligation quote today to see for yourself.

IMAGE

Do you need help with fitting or repair extractor fan?

Frequently Asked Question

Cleaning an extractor fan is important to ensure that it works efficiently and effectively. Here are the steps to clean an extractor fan:

  1. Turn off the electricity supply to the fan before you begin cleaning.
  2. Remove the cover or grill from the fan.
  3. Use a soft brush or a cloth to remove any dirt, dust, or grease from the blades of the fan.
  4. Soak the cover or grill in warm, soapy water to remove any built-up grime.
  5. Use a soft brush or cloth to scrub the cover or grill, and then rinse it with clean water.
  6. Allow the cover or grill to dry completely before putting it back in place.
  7. Reconnect the electricity supply to the fan and switch it on to check that it is working correctly.
  8. It’s important to clean your extractor fan on a regular basis, especially if you use it frequently, to prevent any blockages that can cause damage to the motor or reduce its efficiency.

To clean an extractor fan filter, follow these steps:

  1. Turn off the power supply to the extractor fan to prevent any accidents.
  2. Remove the front cover or grille from the fan to access the filter.
  3. Gently remove the filter from the fan.
    Use a soft-bristled brush or a vacuum cleaner to remove any loose dust or debris from the filter.
  4. Soak the filter in warm, soapy water for about 10-15 minutes.
  5. Scrub the filter with a soft brush or sponge to remove any remaining grease or dirt.
  6. Rinse the filter thoroughly with clean water and let it dry completely.
  7. Once the filter is completely dry, replace it in the extractor fan and secure the front cover or grille.
  8. It is recommended to clean the extractor fan filter at least once every six months to ensure optimal performance and prevent any potential fire hazards.

According to building regulations in the UK, kitchen extractor fans are a legal requirement for kitchens built since 2006 that do not have enough natural ventilation sources. If you are planning a kitchen extension or renovation, you must not worsen the existing ventilation and must retain or replace it with a system that has a higher extraction rate. Homeowners are required to notify a building control body before starting a renovation or home improvement project. Installing an extractor fan is the most effective way to meet the building regulations, as it can be fitted above a hob. However, recirculation hoods are not sufficient as they filter and release air back into the kitchen rather than releasing it outside. The kitchen extractor fan must release air to an outside vent and meet the extraction airflow rate of 60 L/s or more, as outlined in the Approved Documents.

It is possible to replace a bathroom extractor fan yourself, but it is important to have the necessary knowledge and experience to carry out the job safely and correctly. Electrical work can be dangerous, and it is essential to follow safety procedures and have the appropriate tools and equipment. If you are not confident in your abilities, it is recommended to hire a qualified electrician to replace the fan for you.

Extractor fans do not use a significant amount of electricity. They are typically small, low-powered appliances that operate for short periods of time. The amount of electricity an extractor fan uses will depend on its wattage and the length of time it is used. On average, a standard extractor fan will use between 5 and 30 watts of electricity, which is a relatively small amount compared to other household appliances. It is worth noting, however, that if the fan is left running for extended periods of time, it can contribute to overall energy usage and may impact electricity bills over time.